Basic Xbox 360 3 Red Light Repair Guide
Electronic gadgets, such as the Xbox 360 are prone to encounter errors during use. As one switches on the power for the gaming unit, there may be instances that it flashes its red lights, located on the ring surrounding the power button. A basic Xbox 360 3 red light repair know-how is essential in providing any owner needed information. This is to prevent impulsive actions of bringing the unit to a repair center right away and therefore waste big bucks instead of being able to properly assess the problem and perform the immediate tests to confirm the nature of the problem.
To determine that an Xbox 360 3 red light repair is needed is when three of the four LEDs light up around the power button, with the exception of the right side. A normally powered unit lights up all 4 LEDs around. Another symptom is when the color of the light around the power button shifts from green to orange, which may indicate that the external power supply which provides the required electricity to the console has encountered an error or malfunction.
One fail safe methods employed by the power supply of the Xbox 360 is an automatic shutoff should there be a surge in electricity. It may also trip off when the temperature goes above normal operating range. If any of these two most common occurrences happen, the machine turns off or flashes the red light.
The first thing to assess when this error happens is to check if the power supply is hot. If it is, try facing an electric fan or exposing the vent to an open area to allow cooling. It should be noted that the console should not be turned back on right away as it may deteriorate with another overheat. Once the unit has turned its light back to green, play may be resumed, provided that there is ample space for ventilation.
Another troubleshooting method would be to check if the power supply is connected to an outlet or source which provides the correct voltage. It is important that the owner checks the packaging instructions on how much voltage output is required and limited for the gaming console. Voltage variants are 100 and 220 volt configurations, depending on geographical location.
It would also be helpful to try another power cord. The power cord which is a default component with the packaging has a generic alternative in electronic stores. Unlike the specific power supply of the Xbox 360 unit, the power cord may be replaced if damaged. It may be wise to try out another power cord to check if the problem lies with its connectivity.
Other than these three common assessment tests to perform, one may seek the help of technical support if the LEDs still don’t fully light up or become green. Worse, one may have to bring the machine to a repair shop and have it fixed.
About the Author:Learn how to quickly and easily repair your Xbox360 system without paying tons of dollars. Go to http://www.xboxrepair360.com right now!
Article Source: ArticlesBase.com - Basic Xbox 360 3 Red Light Repair Guide